Materials

3D Systems FIGURE 4 MODULAR (DLP)

Overview

3D Systems Figure 4 Modular

Endless Plastic Possibilities

Whether you’re looking for a hard ABS-like plastic, a clear plastic, or an elastomeric plastic, the DLP process opens up these possibilities. Materials are production quality, with an injection like surface, with six sigma repeat-ability. 3D Parts Unlimited installed the first figure 4 modular machine.

Resolution Chart

The resolution chart below shows the range of groove depth this material will produce. The larger the spike, the more significant and deeper the groove. The chart runs from very fine (left) to very large peaks/valleys (right).

Applications:

  • Prototypes
  • Fit & Function
  • Assembly Verification
  • Low-Medium Production
  • Testing of Elastomers

Materials Available

​Figure 4 TOUGH-GRY 10

Material Strength:

​Figure 4 TOUGH-GRY 10

This is a strong durable plastic with a 25% elongation at break! This material is fantastic for a variety of applications.

Benefits:

  • Harder Liquid Polymer Plastic
  • High Tolerances
  • Lower Chance of Warping
  • Injection Mold Like Surface

Colors Available:

Figure 4 Rubber 65A Black

Material Strength:

Figure 4 Rubber 65A Black

Elastomeric liquid polymer. This material is used for parts that need to have high flexability.

Benefits:

  • Different Shore A Values
  • Gasket & Seal Fit
  • Rubber-like Functions
  • Vibration Dampening Components
  • Injection Mold Like Surface

Colors Available:

Figure 4 High Temp 300C

Material Strength:

Figure 4 High Temp 300C

Figure 4 HI TEMP 300-AMB plastic for testing and use in high heat environments up to temperatures of 300C.

Benefits:

  • Heat Deflection Temperature @ 0.455 and 1.82MPa: >300 °C
  • Impact strength (notched Izod): 10 J/m
  • Tensile modulus: 4000 MPa

Colors Available:

Specs

Mechanical Properties

Technical Downloads