3D Systems Figure 4 Modular
Endless Plastic Possibilities
Whether you’re looking for a hard ABS-like plastic, a clear plastic, or an elastomeric plastic, the CLIP process opens up these possibilities. Materials are production quality, with an injection like surface, with six sigma repeat-ability.
Resolution Chart
The resolution chart below shows the range of groove depth this material will produce. The larger the spike, the more significant and deeper the groove. The chart runs from very fine (left) to very large peaks/valleys (right).
Applications:
- Prototypes
- Fit & Function
- Assembly Verification
- Low-Medium Production
- Testing of Elastomers
Materials Available
Figure 4 TOUGH-GRY 10
Material Strength:
Figure 4 TOUGH-GRY 10
This is a strong durable plastic with a 25% elongation at break! This material is fantastic for a variety of applications.
Benefits:
- Harder Liquid Polymer Plastic
- High Tolerances
- Lower Chance of Warping
- Injection Mold Like Surface
Colors Available:
Figure 4 Rubber 65A Black
Material Strength:
Figure 4 Rubber 65A Black
Elastomeric liquid polymer. This material is used for parts that need to have high flexability.
Benefits:
- Different Shore A Values
- Gasket & Seal Fit
- Rubber-like Functions
- Vibration Dampening Components
- Injection Mold Like Surface
Colors Available:
Figure 4 High Temp 300C
Material Strength:
Figure 4 High Temp 300C
Figure 4 HI TEMP 300-AMB plastic for testing and use in high heat environments up to temperatures of 300C.
Benefits:
- Heat Deflection Temperature @ 0.455 and 1.82MPa: >300 °C
- Impact strength (notched Izod): 10 J/m
- Tensile modulus: 4000 MPa